Tarifa pública
  1. Todos los productos
  2. Data General DG-WS7110 - Controladora WiFi hasta 512 Puntos de Acceso (1024 in-wall) - Requiere licencia - Incluye licencia inicial 32 Aps

Data General DG-WS7110 - Controladora WiFi hasta 512 Puntos de Acceso (1024 in-wall) - Requiere licencia - Incluye licencia inicial 32 Aps

DG-WS7110
https://www.landamex.com/web/image/product.template/5890/image_1920?unique=e3d59b8

Controladora para la gestión de redes grandes y medianas, adecuado para la implementación en una red de capa 2 o capa 3.

1,791.09 € 1791.0900000000001 EUR 1,791.09 € IVA excluido 2,231.79 €

MXN $ 35,470.00 IVA excluido 44,197.50 €

Consultar

    Esta combinación no existe.

    Contáctenos

    Data General DG-WS7110 - Controlador de acceso inalámbrico de 10 Gbps de alto rendimiento y última generación

    El controlador de acceso inalámbrico (AC) de alto rendimiento DG-WS7110 ha sido desarrollado para soportar redes inalámbricas de alta velocidad de próxima generación. Puede desplegarse en una red de Capa 2 o Capa 3 sin ningún cambio de arquitectura o hardware, implementando un control seguro y sin fisuras sobre las redes inalámbricas.

    Puede gestionar hasta 32 puntos de acceso inalámbricos (AP) de forma predeterminada. Con licencias para ampliación de capacidad, puede gestionar hasta 512 AP genéricos o 1.024 AP de placa de pared.

    Mediante una potente gestión y control centralizados y visualizados de las redes inalámbricas, el DG-WS7110 puede simplificar significativamente la construcción y el despliegue de redes inalámbricas. Se puede utilizar con los AP de Data General y https://wis.datageneral.cloud - una plataforma de gestión unificada para redes cableadas e inalámbricas, para lograr un control flexible de los AP, optimizar la cobertura y el rendimiento de RF, implementar la gestión de clústeres y reducir la carga de trabajo de la implementación de dispositivos.

    Al adoptar tecnologías mejoradas de seguridad y clustering, el DG-WS7110 ofrece servicios de red basados en identidad.

    Varios AC de un clúster pueden compartir una base de datos de usuarios, lo que permite a los clientes desplazarse sin problemas por distintas zonas de una red. 

    El diseño de clúster garantiza la seguridad y la integridad de la sesión durante la itinerancia y una interacción fluida de datos y voz a través de aplicaciones Wi-Fi. 

    Características destacadas: 

    • Admite 32 AP de forma predeterminada y hasta 512 AP después de la expansión.

    • Equilibrio de carga inteligente, mejorando el rendimiento de la red.

    • MAB, 802.1X y autenticación basada en web, lo que garantiza la seguridad de la red.

    • Gestión unificada de la nube, que permite operaciones y mantenimiento remoto.


    ModelDG-WS7110
    Hardware Specifications
    System specifications
    Memory4 GB
    Flash memory16 MB
    Dimensions and Weight
    Unit dimensions (W x D x H)440 mm x 200 mm x 43.6 mm (17.32 in. x 7.87 in. x 1.72 in., without rack-mount brackets)
    486.2 mm x 205 mm x 43.6 mm (19.14 in. x 8.07 in. x 1.72 in., including rack-mount brackets)
    Rack size1 RU
    Unit weight2.7 kg (5.95 lbs)
    Shipping weight3.5 kg (7.72 lbs)
    MountingRack-mount
    Port Specifications
    Fixed service port8 x 10/100/1000BASE-T ports
    2 x 1GE SFP/RJ45 combo ports
    ● RJ45 ports support 10/100/1000BASE-T.
    ● Port 9/MGMT can also be used as a management port.
    2 x 10GE SFP+ ports
    Fixed management port1 x RJ45 console port
    2 x USB 3.0 ports, compatibility with USB 2.0
    Status LED1 x system status LED
    1 x power status LED
    8 x 10/100/1000BASE-T port LEDs
    2 x 1GE SFP/RJ45 combo port LEDs
    2 x 10GE SFP+ port LEDs
    Button1 x Reset button
    ● Press the button for shorter than 3 seconds. Then the device restarts.
    ● Press the button for longer than 3 seconds. Then the device restores to factory settings.
    NoteA combo port consists of an optical Ethernet port and an electrical Ethernet port on the panel and can be used as the optical or electrical port at one time. When either of the Ethernet ports is working, the other port is automatically shut down. You can select a port type as required.
    Power Supply and Consumption
    Maximum power consumption30 W
    Power input100 V AC to 240 V AC, 50 Hz to 60 Hz
    Power output12 V/3.33 A
    Environment and Reliability
    TemperatureOperating temperature: 0°C to 45°C (32°F to 113°F)
    Storage temperature: –40°C to +70°C (–40°F to +158°F)
    Note: At an altitude in the range of 1,800–4,000 m (5,905.51–13,123.36 ft.), every time the altitude increases by 166 m (544.62 ft.), the maximum temperature decreases by 1°C (1.8°F).
    AltitudeOperating altitude: –500 m to +4,000 m (–1,640.42 ft. to +13,123.36 ft.)
    Storage altitude: –500 m to +4,000 m (–1,640.42 ft. to +13,123.36 ft.)
    HumidityOperating humidity: 10% to 90% RH (non-condensing)
    Storage humidity: 5% RH to 95% RH (non-condensing)
    Software Specifications
    Performance Indicators
    Default number of managed APs32
    Note: The default number of APs that can be managed by the DG-WS7110 is subject to the AP model. For details, see the Ordering Information.
    Maximum number of configurable APs2,048
    Maximum number of managed APs512
    Note: The maximum number of APs that can be managed by the DG-WS7110 is subject to the AP model. For details, see the Ordering Information.
    Maximum number of managed clients5,120
    Note: The maximum number of clients that can be managed by the DG-WS7110 is subject to the network environment. Contact technical support team for details.
    Forwarding capacity10 Gbps (subject to the wireless network environment)
    VLAN4,094
    Maximum number of clients supported by the built-in Portal server1,5
    ACL4,096
    MAC address table32,768
    ARP table32,768
    Intra-AC roaming handoff time< 50 ms
    WLAN
    IEEE 802.11 protocols802.11, 802.11b, 802.11a, 802.11g, 802.11d, 802.11h, 802.11w, 802.11k, 802.11v, 802.11r, 802.11i, 802.11e, 802.11n, 802.11ac, and 802.11ax
    Layer 2 and Layer 3 topology supported between an AP and an AC
    An AP can automatically discover the accessible AC.
    An AP can be automatically upgraded through the AC.
    An AP can automatically download the configuration file from the AC.
    CAPWAP through NAT
    RoamingIntra-AC Layer 2 or Layer 3 roaming
    Inter-AC Layer 2 or Layer 3 roaming
    Intra-AC Layer 2 or Layer 3 roaming in local forwarding mode
    Inter-AC Layer 2 or Layer 3 roaming in local forwarding mode
    Forwarding modeCentralized forwarding
    Local forwarding
    Service-based flexible forwarding
    Wireless QoSAP/WLAN/STA-based bandwidth limiting
    (STA-based rate limit range: 8–261,120 in the unit of 8 kbps. For example, if you set the value to 8, the rate limit is 8 x 8 kbps = 64 kbps.)
    Static and intelligent rate limiting based on STA quantity
    Fair scheduling
    User isolationAC-based user isolation
    AP-based user isolation
    WLAN-based user isolation
    ReliabilityAC virtualization
    AC failover
    Multi-AC hot standby (1+1 A/A and A/S hot standby, and N+1 hot standby)
    Multi-AC cluster (N-to-N)
    Remote intelligent perception technology (RIPT)
    Non-stop service during upgrade
    STA managementAccess control based on the number of STAs associated with the AP
    Access control based on the number of STAs associated with the SSID
    Balanced access control based on the number of STAs associated with the AP
    Balanced access control based on the AP traffic
    Band steering
    Configuration of the RSSI threshold in dBm (range: 0–100)
    Configuration of the STA idle timeout period in seconds (range: 60–86,400)
    WLAN optimizationAdjustment of the transmit power for beacon or probe response frames
    RF managementCountry or region code setting
    Manual setting of the transmit power
    Automatic setting of the transmit power
    Manual setting of the operating channel
    Automatic setting of the operating channel
    Automatic adjustment of the data rate
    Coverage Hole Detection
    AP load balancing based on traffic and STA quantity
    Band selection
    Radio frequency interference (RFI) detection and mitigation
    Security
    IPv4 security authenticationWeb-based authentication
    802.1X authentication
    MAB authentication
    IPv6 security authentication802. 1X authentication
    Web-based authentication
    IEEE 802.11 security and encryptionMulti-SSID mode
    SSID hiding
    IEEE 802.11i-compliant PSK authentication
    WPA and WPA2
    WEP (WEP/WEP128)
    TKIP
    CCMP
    ARP anti-spoofing
    CPPSupported
    NFPPSupported
    WIDSSupported
    AP virtualizationSupported
    Protocols
    IPv4 protocolsPing and Traceroute
    DHCP server, DHCP client, DHCP relay, and DHCP snooping
    DNS client
    NTP
    Telnet
    TFTP server and TFTP client
    FTP server and FTP client
    IPv6 protocolsDNSv6 client
    DHCPv6 relay and DHCPv6 server
    TFTPv6 client
    FTPv6 server and FTPv6 client
    IPv6 CAPWAP
    ICMPv6
    IPv6 ping
    Manual tunnels, automatic tunnels, and ISATAP
    Manually configured IP addresses and automatically created local addresses
    IPv6 traceroute
    Neighbor discovery
    IPv4 routingStatic routing, RIP, and OSPF
    IPv6 routingStatic routing
    Management
    Network managementSNMP v1/v2c/v3
    RMON
    Syslog
    Remote probe
    Network management platformEweb
    DG-WIS
    Wi-Fi heat map
    User access managementConsole port login, Telnet login, SSH login, and FTP upload
    Regulatory Compliance
    Safety regulationIEC 62368-1, EN 62368-1
    EMC regulationEN 55032, EN 55035, EN 61000-3-3, EN IEC 61000-3-2, and EN 300 386